centreless grinder, hydraulic lathe tracer, precision all geared lathes, slant bed cnc lathe & chucker, hydraulic presses and piller type drilling machines centreless grinder, hydraulic lathe tracer, precision all geared lathes, slant bed cnc lathe & chucker, hydraulic presses and piller type drilling machines
two tracer copy lathe machine  

TWO TRACER COPY LATHE

 
two tracer copy lathe machine two tracer copy lathe

tie road housing, tie rod ball pin, engine valve and bearing race
  SPECIFICATIONS
- Swing over Main Base

580
- Max. Swing over saddle 330
- Turning Dia 10-120
- Maximum Boring Dia 20-60
- Maximum Chuck Size 200
- Maximum Turning Length 300
- Maximum Bore Length 80
- Taper in spindle MT-4
- Maximum Dia of Round Master 240
- Horse Power of Head stock Motor (2 speed) 7/8.4
- No. of Spindle speeds 4 or infinitely variable
- Horse Power of Power Pack Motor (2 Nos.)3 3
  STANDARD ITEMS
  • Machine with two Tracers
  • Master Carriers (2 sets)
  • Electro-hydraulic programme 
    Control
  • Feed Cylinder (2 nos.)
  • Coolant Installation
  • Hydraulic Powerpack with valves
  • Centralised Lubrication
  OPTIONAL ITEM
  • Centre Slide (Power Tailstock)

 



  THE HIGHLIGHTED FEATURES ARE 
1. Front Tracing Slide Can be used for external/internal Copying.
2. Rear Tracing Slide Can be used for external/internal Copying optionally 
3. Centre Slide Provided for boring or holding jobs between centres
4. Feed Cylinders For infinitely variable feed to suit cutting conditions.
5. Chuck Facilities for normal mechanical chuck, hydraulic chuck or collet holding.

power packPOWER PACK
The power Pack is equipped with gear type positive displacement pump and is available with single and dual delivery as required. Gears are ground to render noiseless service. 
MODEL SD-7 SD-14 DD-77
Type

Single
Delivery

Single
Delivery

Dual
Delivery

Pump output in ltr/mt of each delivery

 7 14 7
Pressure in kg/cm2 18 18 18
Horse Power 0.75 1.5 1.5




power tailstockPOWER TAILSTOCK
 These units are extremely useful for controlling of holding pressure and also sensitive drilling from the tailstock end of the lathe. Pressure and feedrate can be regulated.

 
MODEL PT-63 PT-80 PT-100
Stroke in mm

100

150

200

MAx. working pressure in kg/cm2

 18 18 14

Max. forward speed in mm/sec

 32 20 22
Max. thrust in kg. 400 700 900




shaft copying, copy boring and facing job sketches

shaft copying, copy boring and facing COPYING JOB SKETCHES
For Shaft Copying the copying tool is inverted and the lathe spindle rotates in the normal forward direction, Longitudinal adjustment for initial length setting is provided in the Master-holding Tailstock.

For Copy Boring a flat template is normally used and boring bars are held to cut in a position forward of the work axis.

For Facing operation the Tool is mounted in inverted position and is traversed with the Cross-slide feeding from the centre of the workpiece towards the rear of the lathe.



Note : All the above dimension are subject to changes arising out of continues product improvement. The description 'standard accessories' confirms to its list and not photo of the machine shown in the catalogue

 

two tracer copy lathe machine